BACKBLAZE SYNOLOGY 2019 INSTALL
BACKBLAZE SYNOLOGY 2019 PASSWORD
BACKBLAZE SYNOLOGY 2019 DOWNLOAD

During the first time setup, you will be asked to give the NAS a name and this will help identify the NAS on the network/internet.

BACKBLAZE SYNOLOGY 2019 PASSWORD

It may seem obvious, but for your safety and security, the DS1019+ requires all connected users to have a username and password to access the contents of the NAS. Once you have installed it, the NAS will then need to reboot and a timer will appear on the screen to count down how long it takes to restart.

BACKBLAZE SYNOLOGY 2019 INSTALL

It is HIGHLY recommended that you install the latest version of DSM, as it will have the most recent and up to date security patches and software available.

BACKBLAZE SYNOLOGY 2019 DOWNLOAD

This can be done automatically by clicking proceed, or if you have a beta or specific version of DSM you want to install, you can download it from the Synology Download support site and browse your local download folder for the. DSM allows users to run hundreds of applications, each with their own user interface (UI) on the NAS, that they can access on desktop computers, mobile devices and media devices.Īfter you have installed hard drives and booted the device up, and found the device in your network (using the free Synology Assistant application for PC/Mac or DS Finder mobile app) you will be asked to proceed with the Synology DSM installation. The Synology DS1019+ NAS runs on its very own operating system, known as Diskstation Manager (DSM) and this is what separates it from most traditional USB direct-attached storage (DAS) and network drives that are just brainless storage. Though they are covered in more detail later in this guide DS1019+ NAS – DSM Installation I have purposely skipped more advanced setup factors, such as installing SSD for cache, upgrading RAM and using multiple LAN cables for link aggregation on the DS1019+ NAS, as these are a little more advanced. You can now click the power button on the front of the DS1019+ NAS and you will hear a beep and the device will take around 2-3mins to initialise. Finally, you need to connect the network LAN cable into the network port on the rear of the NAS and connect the other end to your router, modem or switch (in simple speak, the box your internet service provider have you or the box the other internet things are connected to. Once this is done, connect the power brick into the rear of the NAS and then the mains power lead into the power brick and the wall socket. Then just slide each tray+drive back into the NAS.

Then put the clips back, ensuring the 4 plugs are inserted into the holes on the drive. Once removed, you can slot the hard drive into the tray, with the connector facing out and the manufacturer label faced up. Then each tray has removable clips on either side.

Once you have unboxed all the accessories, you need to remove the trays (all of them, or as many as you need for your hard drives).

Physical Installation of the hard drives or SSD into the Synology DS1019+ NAS is very, very easy and is completely toolless (for Hard drives, SSD require you to use 4 screws for each that are in the accessories box).

Backblaze synology 2019